BearCat Mfg.
Figure 7-2 (Sheet 1). Chipper Assembly
images/7-2.jpg)
| 7-2 | Chipper Assembly | RF | ||
| 1 | Cat Walk Forward Conveyor Cross-Over | GRD-61707 | 1 | |
| 2 | Head Pulley Assembly (W/Lagging) | MCH-61404 | 2 | |
| 3 | Adapter, Wheel Machined Spicer/Dana | BRK-61482 | 2 | |
| 4 | Compensating Pressure Pump | PMP-51615 | 1 | |
| 5 | Conveyor Belt Assembly 30” X 490” (reg) (standard) | MSC-60482 | 2 | |
| Conveyor Belt Assembly 30” X 490” (hot) (optional) | MSC-51766 | 2 | ||
| 6 | SCM Pillow Block Bearing 1.938” | PTM-51415 | 4 | |
| 7 | Sway Bar Assembly | PTM-51459 | 1 | |
| 8 | Spring Timbren Rubber Suspension | MSC-100130 | 2 | |
| 9 | Cylinder, Chip Box Tilt (4” X 8”) | CYL-50667 | 2 | |
| 10 | Wheel Assembly Spicer/Dana Axle and Rear axle | MSC-61466 | 4 | |
| Tire 385/65R 22.5 160K | MSC-51739 | 4 | ||
| Nut Hex Conical 3/4” – 16 UNV-2B | FAS-61487 | 40 | ||
| 11 | Filter Head Assembly (suction 2-filter) | FTR-51731 | 1 | |
| Filter Hydraulic Zinga 10-micron | FTR-22502 | 2 | ||
| Dual Filter Head | FTR-51733 | 1 | ||
| Gauge Vacuum | MTR-22499 | 1 | ||
| 12 | Master/Cylinder Air/Hydraulic JD & Spicer/Dana Brakes | PTM-51644 | 1 | |
| 13 | Air Dryer Rockwell Wabco | FTR-60949 | 1 | |
| 14 | Bracket, Diesel Tank Mount | BRK-61825 | 2 | |
| 15 | Fender Rear | GRD-51808 | 2 | |
| 16 | Tank, Chipper Diesel Tank Assembly “97” | TNK-61824 | 1 | |
| 17 | Alarm Back-Up | ELC-24293 | 1 | |
| 18 | Receiving Hopper Assembly | HSG-51435 | 1 | |
| 19 | Beacon | ELC-24215 | 1 | |
| 20 | Pre-Cleaner Syklone Model 9002 | FTR-51857 | 1 | |
| 21 | Hand Rail Conveyor Hand Rail “97” | GRD-61701 | 2 |