Innovation by Design
  • PRODUCT
  • SPECIFICATIONS
  • BROCHURE

BearCat Stealth Chipper

BC-2012/CRC 8 to 16 foot Tandem "Stealth" Chip Spreader

Cummins Tier3 QSB6.7L 6-cylinder Diesel

Cummins Tier3 QSB6.7L 6-cylinder Diesel

275HP @ 2,300RPM. 730ft-lb of torque @ 1,500RPM. Air compressor; engine mounted Wabco 17 CFM @ 2400RPM. Wabco System Saver 1200 series 12Vdc air dryer. Dry type air cleaner, disposable element type oil filter.

Hydrostatic Transmission

130cc variable displacement piston pump. 160cc variable displacement piston motor. 2-speed (high/low) transfer-case (Electric / Air Shift). Automotive control w/HP & Anti-stall control; drives like a truck with and automatic transmission. 		Hydrostatic Transmission
Planetary Axle

Axles, brakes and tires

Front Wheel Drive, 14.769:1 planetary drive/steer axle, 42deg turn, 31,800lbs (14,425kg) w/rubber suspension.

Steering

Front axle integrated hydraulic steering cylinder. Steering system: Hydraulically powered orbital type, no mechanical linkage, with an engine mounted vane type power steering pump with a 6gpm flow control cover

Front axle integrated hydraulic steering cylinder
5" diameter trailer axle, 25,000lbs

Rear Axle

Solid tube type 5" diameter trailer axle, 25,000lbs (11,340kg) capacity, with oil filtered wheel bearings. Front Brakes:

Air Brakes

Air over hydraulic master cylinder. Service brakes hydraulic multi-disc wet. Parking brakes; spring applied air-released disc, mounted on the front drive shaft. Service brakes; 16.5" x 7" drum, S-cam air brakes. Parking brakes; Spring anchor-lok. Tires: 385/165R X 22.5 highway tread. Wheels: disc type 10 hole, front and rear are interchangeable.

 Air over hydraulic master cylinder
pressure compensated axial piston pump

Hydraulic system

130cc pressure compensated axial piston pump, system pressure set at 2300psi (160bar) Hydraulic tank; 80 gallon (300liter), closed to atmosphere 5psi (0.35bar) positive pressure system, to prevent moisture ingression. Large 27" x 36" (68.6cm x 91.4cm) oil cooler, with large 2 1/2in. (6.35cm) plumbing and a large 24" (61cm) dia. temperature controlled hydraulic fan.

Hydraulic Cooler

Constant flow 15gpm circulation filtering/cooling pump. Filters: 10micron return, one water absorbing, suction 100mesh. Belt motors; 400cc LSHT, direct coupled to the head-pulleys. Auger motors; 200cc LSHT, direct coupled to the augers.

Large 27" x 36" (68.6cm x 91.4cm) oil cooler
Rear hopper is a folding wing type

Folding Rear Hopper

Rear hopper is a folding wing or bat wing type, when folded for transporting dimensions are 8' (2,45m) wide.

Large Capacity Hopper

Fully opened dimensions are 120" (3,05cm) wide, with struck capacity of 4.0 cubic yards (3,05 cubic meters).

 Rear hopper is a folding wing type
conveyor belts with 35º troughing rollers.

Heavy Duty Belts

Two heavy duty 20" (51cm) 2 ply conveyor belts with 35º troughing rollers.

Automatic Belt Control

Belts speed (on/off) is controlled by ultrasonic position sensors measuring chip level in the spread hopper. Belt speed is proportional to aggregate demand.

 Belts; two heavy duty 20" (51cm) 2 ply conveyor belts with 35º troughing rollers.
Spread hoppers

Spread Hoppers

Infinitely variable from 8' (2,45m) to 16' (4,9m), capacity 3.2 cubic yards (2,45 cubic meters) combine spread hoper total. Optional extensions; 1' (0.305m) left & right.

Spread Rate Control

HSLA steel construction tandem hoppers extend hydraulically from 8' to 16'. Vertical aggregate delivery and wide mouth hopper opening, eliminate the need for a spread roll. Computerized hydraulic cam shaft controls the gate opening. Air cylinders on individual gates provide instant on-off to pre-determined opening width controlled by cam shaft.

 Heavy duty spread gate CAM gear box
14” abrasion resistant auger

Augers

14" abrasion resistant auger moves materials to the outside gates. No agitator of spread roll to wear or limit production. Oversized objects or material pass through the largest opening in the industry. The tandem design allows for straight line starts and minimal aggregate waste.

Hitch

Hydraulic positive non binding, latch and release controlled by operator.

 Hydraulic positive non binding

internal regulator.

Electrical system

12Vdc 160amp belt drive alternator w/internal regulator. Two 12Vdc Group 31-MHD / 950cca batteries. Computer Rate Control (CRC), Sauer-Danfoss Plus1 CAN network communication, w/automotive style wire harnesses.

Wiring Harnesses

All electrical connectors, & controllers IP67 rated (pressure wash-down rated). Any non IP67 rated connectors are crimped and soldered to prevent corrosion of terminals and copper wiring. Field replaceable automotive style wiring harnesses.

Sauer-Danfoss Plus1 CAN network communication
Operator display advanced color TFT 240 x 400 pixel

Operator display

Advanced color TFT 240 x 400 pixel, to display fuel level, hydraulic temperature, engine temperature, engine RPM, hour meter, charging system voltage. System diagnostics displayed on the color TFT display: Battery voltage low/high, computer node communication okay, pictorial display of switch position, all sensor voltage or pulse (frequency) values, hydraulic & engine over-temp log, hydraulic oil level low log.

Operator Station

Single seat operator station The operator station hydraulically moves left/right and can be used on the left, right side or anywhere in between.

chip spreading function control switches
The operator station hydraulically moves left/right

Individual Gate Control

Gates are controlled in 1 foot increments individually from the operators station. Belt operation selection; OFF/Auto/Auto w/Master Switch ON. Optional: High output low current draw light package.

Comfort and Access ability

Dash panel is directly in from of the operator. All chip spreading function control switches are on a control panel accessible while the operators arm is on the right side arm rest. Seat adjustments; fore & aft, backrest angle, and height. Accelerator/Brake pedal adjustment; fore and aft. Steering wheel adjustment; 30deg of angle.

Dash panel is directly in from of the operator
air cleaner

Designed by Mechanics

Easy access air filter for daily inspection. Inspection door next to air filter for engine oil access. Engine hood tilts forward to access entire engine. The guys who design it are the same guys who run them and work on them.

8 foot jimmy

BC-2012/CRC 8 to 16 foot Tandem "Stealth" Chip Spreader Specifications

Material Handling Specifications

  1. Rear hopper is a folding wing type, when folded for transporting dimensions are 8’ (2,45m) wide and when fully opened dimensions are 120" (3,05cm) wide, with struck capacity of 4.0 cubic yards (3,05 cubic meters).
  2. Belts; two heavy duty 20" (51cm) 2 ply conveyor belts with 35º troughing rollers.
  3. Belts speed (on/off) is controlled by ultrasonic position sensors measuring chip level in the spread hopper.
  4. Spread hoppers; infinitely variable from 8’ (2,45m) to 16’ (4,9m), capacity 3.2 cubic yards (2,45 cubic meters) combine spread hoper total.
  5. Optional extensions; 1’ (0.305m) left & right.
  6. Heavy duty spread gate CAM gear box w/non-contact hall effect position feedback sensor.
  7. Cut off gates: Pneumatic powered 12" wide gate, with 1- 1/2" x 6" (3.8cm x 15.2cm) air-cylinders.
  8. Hitch: Hydraulic positive non binding, latch and release.

    Electrical system

  9. 12Vdc 160amp belt drive alternator w/internal regulator.
  10. Two 12Vdc Group 31-MHD / 950cca batteries.
  11. Computer Rate Control (CRC), Sauer-Danfoss Plus1 CAN network communication, w/automotive style wire harnesses.
  12. Operator display advanced color TFT 240 x 400 pixel, to display fuel level, hydraulic temperature, engine temperature, engine RPM, hour meter, charging system voltage.
  13. System diagnostics displayed on the color TFT display:
  14. Battery voltage low/high, computer node communication
    okay, pictorial display of switch position, all sensor
    voltage or pulse (frequency) values, hydraulic & engine
    over-temp log, hydraulic oil level low log.
  15. All electrical connectors, & controllers IP67 rated (pressure wash-down rated).
  16. Any non IP67 rated connectors are crimped and soldered to prevent corrosion of terminals and copper wiring.
  17. Field replaceable automotive style wiring harnesses.
  18. Individual and tapper switch control of gate open and close.
  19. Belt operation selection; OFF/Auto/Auto w/Master Switch ON.
  20. Optional: High output low current draw light package.
    Single seat operator station
  21. The operator station hydraulically moves left/right and can be used on the left, right side or anywhere in between.
  22. Dash panel is directly in from of the operator.
  23. All chip spreading function control switches are on a control panel accessible while the operators arm is on the right side arm rest.
  24. Seat adjustments; fore & aft, backrest angle, and height.
  25. Accelerator/Brake pedal adjustment; fore and aft.
  26. Steering wheel adjustment; 30deg of angle.



    As a part of product improvement, BearCat Mfg. Inc. reserves the right to make changes in any of BearCat’s product specifications at any time. BearCat. Mfg. Inc.

 

Cummins Tier3 QSB6.7L 6-cylinder Diesel.

  1. 275HP @ 2,300RPM.
  2. 730ft-lb of torque @ 1,500RPM.
  3. Air compressor; engine mounted Wabco 17 CFM @ 2400RPM.
  4. Wabco System Saver 1200 series 12Vdc air dryer.
  5. Dry type air cleaner, disposable element type oil filter.
  6. Hydrostatic Transmission (6,000psi / 410Bar):
  7. 130cc variable displacement piston pump.
  8. 160cc variable displacement piston motor.
  9. 2-speed (high/low) transfer-case (Electric / Air Shift).
  10. Automotive control w/HP & Anti-stall control; drives
    like a truck with and automatic transmission.

    Axles, brakes and tires

  11. Front Wheel Drive, 14.769:1 planetary drive/steer axle, 42deg turn, 31,800lbs (14,425kg) w/rubber suspension.
  12. Front axle integrated hydraulic steering cylinder.
  13. Steering system: Hydraulically powered orbital type, no mechanical linkage, with an engine mounted vane type power steering pump with a 6gpm flow control cover
  14. Solid tube type 5" diameter trailer axle, 25,000lbs (11,340kg) capacity, with oil filtered wheel bearings.
  15. Front Brakes: Air over hydraulic master cylinder.
    Service brakes hydraulic multi-disc wet.
    Parking brakes; spring applied air-released disc, mounted
    on the front drive shaft.
  16. Rear Brakes:
    Service brakes; 16.5” x 7” drum, S-cam air brakes.
    Parking brakes; Spring anchor-lok.
  17. Tires: 385/165R X 22.5 highway tread
  18. Wheels: disc type 10 hole, front and rear are interchangeable.

    Hydraulic system

  19. 130cc pressure compensated axial piston pump, system pressure set at 2300psi (160bar)
  20. Hydraulic tank; 80 gallon (300liter), closed to atmosphere 5psi (0.35bar) positive pressure system, to prevent moisture ingression.
  21. Large 27" x 36" (68.6cm x 91.4cm) oil cooler, with large 2 1/2in. (6.35cm) plumbing and a large 24" (61cm) dia. temperature controlled hydraulic fan.
  22. Constant flow 15gpm circulation filtering/cooling pump.
  23. Filters: 10micron return, one water absorbing, suction 100mesh.
  24. Belt motors; 400cc LSHT, direct coupled to the head-pulleys.
  25. Auger motors; 200cc LSHT, direct coupled to the augers.


    Dimensions

    Length: 27’ (8.23m) Width: 8’ (2,45m)
    Height: 12’ (3.65m) w/cab removed 9’ 1" (2.75m)
    Wheelbase: 13’ 2 1/2" (4.03m)
    Weight empty (shipping): 25,300lbs ( 11,475kg)

 

 

If brochure fails to load in 15 seconds, click here to download .pdf